ClearSounds CSC40 Telephone User Manual


 
10
1. Lift the handset
2. Press PROG button (see diagram #7)
3. Press the “#” button
4. Press any of the dial keys 1 - 9 (see diagram #8)
5. The new ringer setting will be activated with the next incoming call.
Your CSC40 is also equipped with a visual ringer, which ashes when the phone rings.
NOTE: You may temporarily turn OFF the audible ringer by selecting the “0” key in the
instructions above. An incoming call will now be indicated only by the red ashing indicator
light located on the top of the phone. The audible ringer will be automatically reset to the
previous setting (1 to 9) when the handset is lifted from the base unit.
If at any time you have questions about your telephone please contact our ClearSounds™
Customer Service Department at: 1-800-965-9043.
CSC40 Phone Operation
MAKING AND RECEIVING A CALL
Making A Call
1. To make a call, lift the handset, listen for a dial tone and adjust your Volume & Tone
Settings. (See pages 10 - 11 for details on the amplication functions)
2. To dial a number you can:
a. Dial a number from the keypad
-OR-
b. Press one of the memory dial buttons (See pages 8 - 9 for instructions on program-
ming Memory Dial Buttons)
3. On completion of the call, carefully replace the handset in the cradle.
Receiving/Answering A Call
When an incoming call is received the phone will ring and the (red) Visual Ring Indicator
will ash.
1. While the phone is ringing, simply lift the handset and speak.
2. Adjust your Volume and Tone Settings if needed (See pages 10 - 11 for assistance)
3. On completion of the call, carefully replace the handset in the cradle.
CHART # 1
Low Mid High
Melody 1 1 2 3
Melody 2 5 5 6
by default
Melody 3 7 8 9