Filter
Top Products
9 – ENGLISH
█ Turning the Handset “Power On/Off” Mode
The A300E handset can be turned to “Power Off” mode, which
can be a convenient way to prevent the phone from ringing
without having to change the ringer setting. When you turn the
handset to “Power Off” mode, calls can’t be made or received
until you turn the power back “On”.
In Standby Mode (not during a live call):
1. To turn the handset “Off”, simply press and hold
until the display turns off.
2. To turn the handset “On”, you can either:
a. Place the handset back into the base and the
handset will automatically power on.
b. Press and hold
until the display turns on.
█ Delete/Terminate Handset
This function allows you to delete a handset that is registered
to the base.
1. Press the Menu soft key to display the main menu list.
2. Press up
or down to scroll to BS Settings and
then press the Select soft key.
3. Press the Select soft key to select Terminate HS. You
will be prompted to enter the PIN.
4. Enter the PIN (the default PIN is 0000) and then press
the OK soft key. If the PIN is validated, you will see a
list of registered handsets.
5. Press up
or down to scroll to the desired handset
that you would like to delete and press the Select soft
key. The selected handset will no longer be registered
to the base.
NOTE: If you selected the current handset or a non-registered
handset, a warning tone will be heard.
PHONE BASE SETTINGS