Filter
Top Products
10
Operating your JV-35
G. Programming The
Emergency Buttons
The Emergency Buttons can
be programmed to dial
numbers with one touch.
You may wish to use these
buttons for police, fire or
medical response.
1. Lift the handset and
press the
PROG button.
2. Enter the phone
number as you would
normally dial it.
3. Press
PROG button
again.
4. Press one of the
Emergency buttons.
5. Hang up the handset.
6. The number is now
stored into the
Emergency button you
selected.
7. To change a stored
number or to program
another memory
button, repeat this
process from step 1.
Fig. 16 - PROG Button
Fig. 17 - Entering Number
Fig. 18 - Emergency Button