Clarity RC200 Telephone User Manual


 
FACTORY PRESET MODES OF OPERATION:
Scan rate = 5 seconds per memory
location.
Tone/pulse switch set to Tone.
TO CHANGE MODES OF OPERATION
Setting the Scan Function
If you have RC100 Press PROGRAM.
To turn Scan function off (or on):
If you have
RC200 Press PROGRAM.
To turn Scan function off (or on):
To turn Voice Activation on (or off), Press PROGRAM.
(RC200 only):
To turn the Unanswered Call Press PROGRAM.
Indicator feature off (or on):
To turn the Voice Mail Indicator Press PROGRAM.
feature on (on off), (RC200 only):
PROGRAMMING NUMBERS INTO MEMORY
Press PROGRAM.
MAKING A CALL BY DIALING ON THE RC
A. From the keypad Press ON/OFF button.
B.Auto Dialing the first number stored in M1 Press ON/OFF button.
C. Memory Dialing Press a memory button once to dial the first
stored number, twice for the second number.
MAKING A CALL USING THE REMOTE TRANSMITTER
A.With Scan function on Press Remote Transmitter once.
B.With Scan function off Press Remote Transmitter once.
ANSWERING A CALL
A. From the keypad Press ON/OFF button to answer.
B. Using the Remote Transmitter Press Remote Transmitter once to answer.
C. Using Voice Activation, Say “Hello” or whistle between rings
(RC200 only). to turn on phone.
10
QUICK START GUIDE/
SUMMARY
For more detailed description see Chapter 5.
OPERATION STEPS
1
1
1
1
1
1
1
1
1
1
1
1
1
1