Clarity D724 Cordless Telephone User Manual


 
14 15
BASE OVERVIEW
1. BASE DISPLAY
In idle: shows the clock status.
"_ _ _ _" will ash if the time is not set; ":" will ash when the time
is set and running.
In base speakerphone volume adjusting mode (during a call): the
middle two digits show the base speakerphone volume level.
BASE OVERVIEW
2. DIRECT MEMORY 2 (Speed Dial "2")
In idle: press to call number stored in Speed Dial location "2" on
your handset.
3. DIRECT MEMORY 3 (Speed Dial "3")
In idle: press to call number stored in Speed Dial location "3" on
your handset.
4. VOL + (VOLUME UP)
During a call: press to increase the base speakerphone volume.
In idle: press to increase base ringer volume.
5. SPEAKERPHONE (backlit, green)
Press to turn speakerphone on or off.
During ringing: press to answer call from the base speakerphone.
During registration: backlight ashes slowly.
6. VOL - (VOLUME DOWN)
During a call: press to decrease the base speakerphone volume.
In idle: press to decrease base ringer volume.
7. DIRECT MEMORY 1 (Speed Dial "1")
In idle: press to call number stored in Speed Dial location "1" on
your handset.
8. DIRECT MEMORY 0 (Speed Dial "0")
In idle: press to call number stored in Speed Dial location "0" on
your handset.
9. FIND
Press the FIND button on the base station to page your registered
handset(s).
2
4
6
9
5
3
1
8
7