Filter
Top Products
36 37
Set the Ringer Tone
1. Press <MENU/ SELECT>, then <UP/DOWN> to select Ringers.
2. Press <MENU/SELECT>, then <UP/DOWN> to select Ringer tone.
3. Press <MENU/SELECT>, then <UP/DOWN> to select the desired
ringer tone (a total of 10 melodies for your selection) for setting ringer
tone for external calls.
Note: The respective ringer tone will be played while browsing the
tone list.
4. Press <MENU/SELECT> to conrm.
Set the Ringer Volume
1. Press <MENU/ SELECT>, then <UP/DOWN> to select Ringers.
2. Press<MENU/SELECT>, then <UP/DOWN> to select Ringer
volume.
3. Press <MENU/SELECT>, then <UP/DOWN> to set the ringer volume
(Off, Level 1 to Level 6).
Note: The respective ringer volume will be played during your
selection. If OFF is selected, will display.
4. Press <MENU/SELECT> to conrm.
Set Key Tone
A single beep is emitted when you press a key. You can turn on or off the key
tone.
1. Press <MENU / SELECT>, then <UP/DOWN> to select Settings.
2. Press <MENU / SELECT>, then <UP/DOWN>to select Key tone.
3. Press <MENU / SELECT>, then <UP/DOWN> to select On or Off.
4. Press <MENU/SELECT> to conrm.
Change the Dial Mode
The default dialing mode is suitable for your country and network operator. It
is unlikely that you should need to change this setting unless advised to do so.
1. Press <MENU/SELECT>, then <UP/DOWN> to select Settings.
2. Press <MENU/SELECT>, then <UP/DOWN> to select Dial Mode.
3. Press <MENU/SELECT>, then <UP/DOWN> to select Tone or
Pulse.
4. Press <MENU/SELECT> to conrm.
Set the Home Area Code
If you dial seven digits to make a local call (no area code required), enter your
area code into the telephone as the home area code. When you receive a call
from within your home area code, the caller ID history only displays the seven
digits of the telephone number.
This feature makes it easy for you to place a call from the caller ID history.
If you dial 10 digits to make a local telephone call, do not use this home area
code feature. If you do, you will not be able to place calls from your caller ID
history as they have only seven digits.
1. Press <MENU/SELECT>, then <UP/DOWN> to select Settings.
2. Press <MENU/SELECT>, then <UP/DOWN> to select Home area
code.
3. Press <MENU/SELECT>, then enter the home area code. Only three
digits in maximum can be entered.
4. Press <MENU/SELECT> to conrm.
Note: If, in the future, your telephone service provider requires you to dial
10 digits to make a local call (area code + telephone number), you will need
to delete your home area code. While the home area code is displaying in step
2 above, press and hold MUTE/X. The home area code is now restored to its
default setting of _ _ _ (empty).
HANDSET SETTINGS
BASE SETTINGS