Filter
Top Products
24 25
Find the Handset
You can use the handset locator feature to nd misplaced handsets.
To start the paging tone:
Press <FIND> on the telephone base. All the registered handsets will ring,
and the ** Paging** is ashing on handset screen.
To stop the paging tone:
• Press <TALK ON / FLASH>, <SPEAKER>, or any dial pad key (0-9 *, or
#) on the handset(s).
- OR -
• Press <FIND> on the telephone base or put the handset in the
telephone base or charge.
Make an Internal Call
This feature is only applicable when there are at least two registered handsets.
It allows you to make internal calls, transfer external calls from one handset to
another handset and make conference calls.
Intercom Another Handset
1. In idle mode, press <MENU/SELECT>, then <UP/DOWN> to select
Intercom.
2. Press<MENU/SELECT>:
• If you have two handsets, your handset screen shows Calling
other handset. The other handset rings and its screen shows
Other handset is calling.
• If you have more than two registered handsets, your screen shows
Intercom to: Use the dial pad keys to select the other handset.
Your handset screen shows Calling HANDSET X. The other
handset rings and its screen shows HANDSET X is calling.
3. The called handset rings. Press <TALK ON/FLASH> or <SPEAKER> on
the called handset to establish the internal call.
Transfer an External Call from Handset to Handset
During an external call:
1. Press <MENU/SELECT>, then <UP/DOWN> to select Intercom.
2. Press <MENU/SELECT>:
• If you have two handsets, the outside call is put on hold and your
handset screen shows Calling other handset. The other handset
rings and its screen shows Other handset is calling.
• If you have more than two registered handsets, your screen shows
Intercom to: Use the dial pad keys to enter a handset number.
The outside call is put on hold and your handset screen shows
Calling HANDSET X. The other handset rings and its screen
shows HANDSET X is calling.
3. The external call is put on hold automatically and the called handset
rings.
4. Press <TALK ON/FLASH> or <SPEAKER> on the called handset to
establish an internal call.
5. Press <TALK OFF/CLEAR> on the calling handset or put the calling
handset on the charging cradle to end the current call with the
external party.
6. The external call is transferred to the called handset.
Make a 3-way Conference Call
The conference call feature allows one external call to be shared with two
handsets or a handset and base. The three parties can share the conversation
and no network subscription is required.
During an external call, press <TALK/FLASH> or <SPEAKER> on the handset
to establish the conference call if another handset has answered the call.
NOTE: Any handset that hangs up during a call will leave the rest of the
handsets still in connection with the external caller.
USING YOUR PHONE
USING YOUR PHONE