Filter
Top Products
9
GETTING STARTED
There are four initial steps involved in setting up
your C35
1. Insert four AA alkaline batteries for maximum amplifi -
cation. See below.
2. Decide if you want the phone to sit on a desk or hang
on the wall.
3. Connect the telephone components. Pages 11-12.
4. Program up to twelve (12) telephone numbers to call
with the press of a memory button. See Page 13.
To install new batteries:
1. Slide open the battery compartment cover on the
bottom of the telephone. This opening is pointed out
with the #2 in Figure 1. To open the battery compart-
ment, use a pen or similar fi ne point instrument to
press into small opening below the compartment door.
2. Install four fresh batteries. Be sure to observe battery
polarity as imprinted on the base of the compartment.
The battery indicator on the top panel will light up if the
batteries are running low.
The batteries are required to reach the maximum
amplifi cation and to fully operate certain functions on the
phone. If the low battery indicator appears, please replace
with new batteries.
2
1
Figure 1