Filter
Top Products
3.4 Adding or Updating Speed Dials (using the web interface)
To add or update speed dials click on the link “Add/Update your Speed Dials” on
the Cisco CallManager User Options Menu as shown on page 7. (Note: These could
be coordinated within an office to simulate the Intercom function on the old phones.)
After clicking the link you can assign speed dials from 1-99 for your phone. If you
have any spare programmable buttons on your phone, they will get the first
speed dials, e.g. if you have 1 programmable button that has not been set to a specific
phone line, speed dial 1 will be on that button.
The remaining speed dials are used by entering the speed dial number on your phone,
then pressing the softkey button below AbbrDial on your phone display.
The following screen shot shows the page for adding and updating speed dials. Just
enter the complete phone number next to the Speed Dial #. The phone number
should be entered exactly the same as if you were dialing the number yourself (for
off-campus, enter 9 plus the 7 digit number, etc.). The Display Text field can be
used to enter who or what the phone number is for. (If the speed dial is for a
programmable button , the Display Text will show next to the button.)
11