Filter
Top Products
1-11
Cisco Unified Wireless IP Phone 7920 Administration Guide for Cisco Unified CallManager Release 4.2 and 5.0
OL-9356-01
Chapter 1 An Overview of the Cisco Unified Wireless IP Phone 7920
Overview of Configuring and Installing the Cisco Unified Wireless IP Phone 7920
3. Add and configure directory
numbers (lines) on the phone by
completing these required fields in the
Directory Number Configuration
window.
• Directory number(s)
• Partition
• Multiple Calls and Call Waiting
• Call Forwarding and Pickup (if
used)
• Voice Messaging (if used)
Adds primary and secondary
directory numbers and
features associated with
directory numbers to the
phone.
Refer to the Cisco Unified
CallManager Administration
Guide, Cisco
Unified IP Phone
Configuration chapter:
“Adding a Directory Number”
section
“Creating a Cisco Unity Voice
Mailbox” section.
See the “Telephony Features
Available for the Phone”
section on page 7-3.
4. Customize softkey templates
(optional).
Adds, deletes, or changes
order of softkey features that
display on the user’s phone
to meet feature usage needs.
Refer to the Cisco Unified
CallManager Administration
Guide,
Softkey Template
Configuration chapter.
See the “Configuring Softkey
Templates” section on
page 7-11.
5. Configure speed-dial numbers
(optional).
Adds speed-dial numbers,
Note Users can change
speed-dial settings
on their phones by
using Cisco
Unified IP Phone
User Options.
Refer to the Cisco Unified
CallManager Administration
Guide, Cisco
Unified IP Phone
Configuration chapter,
“Configuring Speed-Dial
Buttons” section.
Table 1-1 Checklist for Configuring the Cisco Unified Wireless IP Phone 7920 in Cisco
Unified CallManager (continued)
Task Purpose For More Information