Filter
Top Products
An Overview of Your Phone
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0 11
Note After you press , the LED turns green and stays lit while you are using the Applications
menus. If you depart from an application without pressing
or Exit (for example, to answer
a new call), the phone screen display may change but the
button stays green. If you press
again, the application that you were using resumes at the point when it was interrupted.
Accessing the Help System on Your Phone
The Cisco Unified IP Phone 7906G and 7911G provide a comprehensive online help system. To view
the phone help, press and choose Help.
Understanding Feature Availability
Depending on your phone system configuration, features included in this Phone Guide might not be
available to you or might work differently on your phone. Contact your support desk or system
administrator for information about feature operation or availability.
Understanding SIP vs. SCCP
Your phone can be configured to work with one of two signaling protocols: SIP (Session Initiation
Protocol) or SCCP (Skinny Call Control Protocol). Your system administrator determines this
configuration.
Phone features can vary depending on the protocol. This Phone Guide indicates which features are
protocol-specific. To learn which protocol your phone is using, you can ask your system administrator
or you can choose > Model Information > Call Control Protocol on your phone.
Select a menu item Press to highlight a menu item, then press Select.
You can also press the number on the keypad that corresponds
to the number for the menu item.
Go back one level in a menu Press Exit. (Note that if you press Exit from the top-level of a
menu, the menu will close.)
Close a menu (and return to
the Applications menu)
Press Exit one or more times until the menu closes, or press .
Exit the Applications menu Press or Exit.
If you want to... Then...