Filter
Top Products
42-13
Cisco CallManager Administration Guide
OL-6503-01
Chapter 42 Cisco IP Phone Services Configuration
Adding a Cisco IP Phone Service to a Phone Button
Adding a Cisco IP Phone Service to a Phone Button
In addition to adding a Cisco IP Phone Service, so it is available to users on their
phones, you can assign the service to a phone button that is configured as a service
URL. This gives the user one-button access to the service without using the
services button on the IP phone.
Perform the following steps to add a service to a service URL button:
1. Add the service to Cisco CallManager (see Adding a Cisco IP Phone Service,
page 42-4)
2. Customize a phone button template by configuring a Service URL button (see
Adding Phone Button Templates, page 59-4)
3. Add the customized phone button template to the phone (see Adding a Phone,
page 57-5)
4. Subscribe the service to the phone (see Configuring Cisco IP Phone Services,
page 57-36)
Parameter
Description
Enter a description of the parameter. The user can access
the text that is entered here while the user is subscribing
to the service. The parameter description should provide
information or examples to help users input the correct
value for the parameter.
Parameter is
Required
If the user must enter data for this parameter before the
subscription can be saved, check the Parameter is
Required check box.
Parameter is a
Password (mask
contents)
You can mask entries in the Cisco IP Phone User Options
application, so asterisks display rather than the actual
user entry. You may want to do this for parameters such
as passwords that you do not want others to be able to
view. To mask a parameter entry, check the Parameter is
a Password (mask contents) check box in the Configure
Cisco IP Phone Service Parameter window in
Cisco CallManager Administration.
Table 42-2 Cisco IP Phone Service Parameter Settings (continued)
Field Description