Filter
Top Products
26 OL-20826-01
Swap Between Calls Before Completing a Transfer
(Cisco Unified IP Phone 6911 only.)
After you connect to the transfer recipient—but before you transfer a call to this party—you can press
the Line button to toggle between the two calls. This allows you to consult privately with the party on
each call before you complete the transfer.
Web Dialer
(Cisco Unified IP Phone 6911 only.)
Web Dialer allows you to click-to-dial contacts from the Cisco Unified CM Directory. Your system
administrator sets up this feature for you.
Use Web Dialer with Cisco Directory
(Cisco Unified IP Phone 6911 only.)
1. Sign in to your User Options web pages.
2. Select User Options > Directory and search for a co-worker.
3. Select the number that you want to dial.
4. If this is your first time using Web Dialer, review the preferences on the Make Call page.
5. Select Dial.
The call is now placed on your phone.
6. To end a call, select Hang up or hang up from your phone.
Set Up, View, or Change Web Dialer Preferences
(Cisco Unified IP Phone 6911 only.)
1. Initiate a call using Web Dialer to access the Make Call page.
The Make Call page displays the first time that you use WebDialer (after you select the number
that you want to dial).
2. Select one of the following options from the Make Call page:
–
Preferred language—Determines the language used for Web Dialer settings and prompts.
–
Use preferred device—Identifies the Cisco Unified IP Phone (Calling device) and directory
number (Calling line) that you will use to place Web Dialer calls. If you have one phone with
a single line, the appropriate phone and line are automatically selected. Otherwise, choose a
phone and/or line. If you have more than one phone of the same type, it will be specified by
device type and MAC address.