Filter
Top Products
5-4
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SIP)
OL-3410-01
Chapter 5 Parameters and Defaults
Configuration Parameter
Default
0
Voice Configuration Menu Access Code
7387277
Configuration Parameter
This parameter is located in the light-yellow portion of the Cisco ATA Web Configuration Page.
ToConfig
Description
After you configure the Cisco ATA, set the parameter to 0, or the Cisco ATA will unnecessarily contact
the TFTP server.
Value Type
Boolean
Range
0 or 1
Default
1—This indicates that the operating parameters have not previously been set.
Voice Configuration Menu Access Code
80001
Parameters for Configuration Method
This section describes the following parameters, which are located in the grey portion of the Cisco ATA
Web Configuration Page:
• UseTFTP, page 5-4
• TftpURL, page 5-5
• CfgInterval, page 5-5
• EncryptKey, page 5-6
UseTFTP
Settings
1—Use the TFTP server for Cisco ATA configuration.
0—Do not use the TFTP server for Cisco ATA configuration.