5-44
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SIP)
OL-3410-01
Chapter 5 Parameters and Defaults
Optional Feature Parameters
Recommended Values
The following settings are recommended for the US:
• DialTone = "2,31538,30831,3100,3885,1,0,0,1000" (approximately -10 dBm)
• BusyTone = "2,30467,28959,1191,1513,0,4000,4000,0" (approximately -21 dBm)
• ReorderTone = "2,30467,28959,1191,1513,0,2000,2000,0" (approximately -21 dBm)
• RingBackTone = "2,30831,30467,1943,2111,0,16000,32000,0" (approximately -16 dBm)
• CallWaitTone = "1,30831,0,5493,0,0,2400,2400,4800" (approximately -10 dBm)
• AlertTone = "1,30467,0,5970,0,0,480,480,1920" (approximately -10 dBm)
The following settings are recommended for Sweden:
• DialTone = "1,30959,0,4253,0, 1, 0, 0,1500" (approximately -5 dBm)
• BusyTone = "1,30959,0,2392,0, 0, 2000, 2000,0" (approximately -10 dBm)
• ReorderTone = "1,30959,0,2392,0, 0, 2000, 6000,0" (approximately -10 dBm)
• RingBackTone = "1,30959,0,2392,0, 0, 8000, 40000,0" (approximately -10 dBm)
• CallWaitTone = "1,30959,0,2392,0, 0, 1600, 4000,11200" (approximately -10 dBm)
• AlertTone = "1,30959,0,2392,0, 0, 480, 480,1920" (approximately -10 dBm)
Specific Call-Progress Tone Parameter Information
Brief descriptions, and lists of default values and the voice configuration menu code for each Cisco ATA
tone parameter, are described in the following sections:
• DialTone, page 5-44
• BusyTone, page 5-45
• ReorderTone, page 5-45
• RingbackTone, page 5-46
• CallWaitTone, page 5-46
• AlertTone, page 5-47
DialTone
Description
The Cisco ATA plays the dial tone when it is ready to accept the first digit of a remote address to make
an outgoing call.
Default values for the nine-integer array
• ntone—2
• freq0—31538
• freq1—30831
• level0—1380
• level1—1740
• steady—1