Filter
Top Products
3
Features & Operation
Answering Calls (Regular Mode)
When visitor presses the Call button on intercom, the
telephone connected to the OTIUEX will ring distinctively
up to four times. If an expandable OTIUEX system is
used all phones within the system will ring. When the
phone is answered it will connect to the Intercom at gate
or door.
After connecting to the Intercom, the gate can be
activated by dialing “*9”.
To activate the primary gate operator dial “*9” on the
phone connected to the OTIUEX.
Caller ID
When there is a visitor at the gate the OTIUEX will
display “Gate Visitor” on a Caller ID telephone (or Caller
ID box) that is directly connected to it.
When there is a visitor at the door, the OTIUEX will
display “Front Door” or “Back Door” depending on how
you have your door Intercom set up (see Intercom
manual).
If someone is tampering with the gate, the OTIUEX will
ring the phone and display “!Gate Tamper!”.
Call Waiting
When talking on the phone connected to OTIUEX, a
distinctive beep will be heard indicating Call Waiting.
Caller ID will alert that there is a visitor. To place call on
hold and connect to the Intercom, press the FLASH
button.
When talking on phone other than the one connected to
the OTIUEX, the telephone connected to the OTIUEX
will ring as normal and the call will not be interrupted.
Change Number of Rings
By default the OTIUEX will ring the telephone 4 times. If
an answering machine is programmed to pick up after 4
rings, OTIUEX should be changed to ring 3 times. This
will prevent the answering machine from picking up if
phone is not answered when a visitor calls. If the
answering machine does pick up, visitor will hear
answering machine message through speaker.
Using the telephone connected to OTIUEX, dial :**102
for 2 rings up through “**105” for 5 rings.
Call Forwarding
If user is away from home the OTIUEX can be
programmed to call when there is a visitor. When visitor
presses Call button the OTIUEX will ring home
telephone 1 time. If telephone is not answered, the
OTIUEX will dial call-forwarding number that has been
programmed. After ringing that number 3 times the
OTIUEX will hang up. If visitor presses Call button again
the process will repeat.
Programming Call Forwarding Number
On telephone connected to OTIUEX, dial “*#”. A beep
will be heard.
Enter the forwarding number (up to 14 digits). To accept
new number, press “#”. A beep will be heard.
NOTE: For long distance calls, include proper prefix.
Verifying Call Forwarding Number
On telephone connected to OTIUEX, dial “**06”. A beep
will be heard. Hang up the telephone.
The telephone will ring and the call forwarding number
that has been programmed will be displayed on Caller
ID screen.
Enable/Disable Call Forwarding
To enable call forwarding dial “**01” on telephone
connected to OTIUEX. A beep will be heard.
To disable call forwarding dial “**02” on telephone
connected to OTIUEX. A beep will be heard.
Remote Activation Through Answering
Machine
Gate can be remotely activated through the answering
machine. Call home and when answering machine picks
up, dial “*9”. The OTIUEX will then activate the gate.
NOTE: Any features of the OTIUEX do NOT require
extra service from the Telephone Company.
Answering Calls (Call Forwarding Mode)
When answering call from OTIUEX, a beep will be heard
for up to 10 seconds. To accept call, dial “0”.
Hang up to disconnect.
To control the gate dial “*9”.
NOTE: OTIUEX checks if home line is busy prior to
dialing forwarding number. If busy, the OTIUEX will wait
and try again. Once OTIUEX dials forwarding number, if
forwarding number is busy, the OTIUEX will wait and try
again.