Filter
Top Products
E-47
Connecting the AC Adaptor for Cradle-type Battery Charger
Use the special AC adaptor for the Cradle-type Battery Charger to connect to a wall
outlet.
1.After making sure that the Cradle-type Battery Charger power switch is turned off,
plug the AC adaptor into the AC adaptor jack on the back of the charger.
2.Next, plug the AC adaptor into a power outlet.
3.Turn on the power. This causes the Cradle-type Battery Charger power indicator lamp
to light in red.
POWER
4.Making sure that their power contacts come into contact with each other, place the
Handheld Terminal onto the Cradle-type Battery Charger. This causes the Cradle-
type Battery Charger power indicator lamp to light in green.
When charging is initiated, indicator 1 on the IT-500 lights up in red. When charging
has been completed, indicator 1 on the IT-500 changes color from red to green.
Important !
Take care to avoid allowing the Cradle-type Battery Charger power contacts to
become connected to each other, which creates a short.
Shorting the power contacts can damage.
Power switch (OFF)
Power contacts
Power switch (ON)
Power Indicator Lamp