Filter
Top Products
E-19
1 Indicator 1
2 Indicator 2
3 Receiver
4 LCD Panel/Touch
Screen
5 Power Key
6 Mic
7 Execute Key
8 Power supply
terminal
9 Numeric Keys
10 CLR Key
11 Fn Key
12 Trigger Key
This lamp indicates the charge status of the battery pack.
Red: Charging
Green: Charging complete
Indicates the result of a barcode or other read operation.
Red: Read error
Green: Read successful
Outputs audio.
Shows text, operation indicators, etc. Also, operations can be
performed and text can be input using the supplied stylus.
Hold down for about one second to turn the power on or off.
Inputs audio.
Press to register an input value and advance to the next step.
Used to supply power from the Cradles and Cradle-type Battery
Charger.
Use these keys to input numbers and letters.
Press to clear all key inputs.
Press when switching to the input mode. In combination with the
numeric keys, each setting is performed while it is also used when
starting application which have been registered beforehand.
Press to perform a barcode read operation. This is also pressed
before performing full reset.
General Guide
Left Front Right Back
12
13
12 3
4
5
6
7
8
9
10
11
14
15
20
21
191817
16
22
23