BT 600 Cordless Telephone User Manual


 
Synergy 600 user guide ~ 6th Edition ~ 20th June ’01 ~ 3718
26
To de-register a handset from
the base
Press the ߜ button to enter
the menu.
Use the
DOWN button to
scroll to SETUP and press the
ߜ button.
Use the
DOWN button to
scroll to DEL HS and press
the ߜ button.
The display will show
PIN?
Enter your 4-digit PIN.
Press the
ߜ button.
Use the
UP or DOWN button
to select the handset you want
to de-register (HANDSET 1-5).
Press the
ߜ button. Display
shows CONFIRM?.
Press
ߜ. You will hear a
confirmation beep.
Once de-registered, the
handset will display NOT REG
symbol will flash as the
handset tries to locate the base.
When the handset locates
the base, the handset will be
automatically selected and
shown on the display.
(If the handset does not locate
the base, the handset will
return to the previous menu.
Try to register again by using
a different available base
number. Ensure that you are
in close vicinity of the base).
M
e
n
u
M
e
n
u
C
a
l
l
s
M
e
n
u
M
e
n
u
M
e
n
u
M
e
n
u
C
a
l
l
s
KEYPAD
R
e
d
i
a
l
C
a
l
l
s
Volume
Note
Handsets can only be de-registered
via another handset.
ADDITIONAL HANDSETS
Note
Your 4 digit pin number is 0000
unless you have previously allocated
a new pin number as explained on
page 19.