Filter
Top Products
19
On-Air 2100 Classic ~ 1st Edition ~ Issue 2 ~ 11th November ’02 ~ 5051
On the handset:-
Press the UP or DOWN button until
the display shows
BASE
.
Press the OK button.
The display will show
REGIST
.
Press the OK button.
The display will show
AUTO
.
Press the DOWN button until
CUSTOM
is
displayed.
The available bases will be displayed.
Use the UP or DOWN button to select
the base you want to register your
handset to.
Press the OK button.
The display will show
CODE?
.
The display will show
____ ____
.
Enter your 4 digit base system code
(once only).
Press the OK button.
At the base:-
Press and hold the button on the base
until it begins to flash.
On the handset:-
The display will show
2
,
3
,
4
,
5
,
6
.
Use the UP or DOWN button to select
the handset you wish to register.
COK
COK
COK
▲
▼
▲
▼
To register a new handset to a
base (if you have changed System
code from 0000)
▼
Note
To check whether registration has been
successful, press the GREEN PHONE button
and listen for the dial tone. If there is no
dial tone either you have not registered the
handset correctly or the telephone line cord
is not plugged in properly.
On the handset:-
Press the UP or DOWN button until
the display shows
BASE
.
Press the OK button.
The display will show
REGIST
.
Press the OK button.
The display will show
AUTO
.
Press OK to confirm.
COK
COK
-2-
COK
▲
▼
Note
If the handset has not been registered to
any other base you do not need to press the
UP or DOWN button to display
BASE
.
Once charged and switched on the display
will show
REGIST
already. Simply carry out
the following instructions to register.
COK
CODE
▲
▼