BT 2100 Classic Cordless Telephone User Manual


 
On-Air 2100 Classic ~ 1st Edition ~ Issue 2 ~ 11th November ’02 ~ 5051
9
Press and hold the GREEN PHONE
button.
The display will show
CALLS
and then
the last number that was dialled or
received.
Use the UP or DOWN button to scroll
to the number you require.
Press the GREEN PHONE button to
dial the number.
Redial
Your handset automatically saves up to 20
telephone numbers dialled and received into a
calls list.
Redial list
During a call, press the C button. C will
now flash to show it is in operation.
Press the C button again to resume
your call.
When on a call you can talk to someone in the
same room, without your caller hearing.
COK
COK
Secrecy
To switch secrecy on/off
Note
The symbol on your handset display
indicates when you are in range of the base
station. If the symbol disappears you are out
of range and will need to move closer to the
base station.
Note
If you press the OK button when a number
in the redial list is displayed you will see the
time and date of the call.
Note
To delete the redial list (and calls list),
see page 11.
Note
When you end your call the handsfree volume
will return to the default setting of volume
level 2.
During a call you can switch to
handsfree mode.
Whilst on a call press the GREEN
PHONE button.
When handsfree is active you see the
symbol flashing
To switch handsfree off, press the
GREEN PHONE button again.
To adjust the volume use the UP or
DOWN button to increase or decrease
the volume.
To use handsfree
Handsfree allows you to talk to your caller
without holding the handset.
Handsfree