BT 2000 Executive Telephone User Manual


 
Press the DOWN button until
Directory
is
displayed.
Press the OK button to confirm.
Use the DOWN button to scroll to
New
.
Press the OK button to confirm.
Enter the name using the letters on
the keypad.
Entering names
Use the keypad letters to enter names by
using short presses of the button
or press and hold the 8 button for the
following characters to appear,
T
,
U
,
V
,
t
,
u
,
v
,
8
. For example, if you
wish to store the name TOM:
COK
To store a name and number in the
directory
COK
13
On-Air 2000 Executive ~ 3rd Edition ~ 2nd August ’02 ~ 4744
During a call you can switch to handsfree
mode.
Whilst on a call press the GREEN PHONE
button.
When handsfree is active you see the
symbol flashing.
To switch handsfree off, press the GREEN
PHONE button again.
Handsfree allows you to talk to your caller without
holding the handset. Please note that handsfree is only
available if the base station your handset is registered
to supports the handsfree feature.
Helpline
If you experience any difficulties using your BT
On-Air 2000 Executive, please call the BT On-Air
Helpline on 0870 240 4682.
During a call, press the C button.
will now flash to show it is in operation.
Press the C button again to resume your call.
When on a call you can talk to someone in the same
room, without your caller hearing.
COK
COK
Secrecy
To switch secrecy on/off
You can store up to 50 of your most frequently used
names and numbers.
Important
If you use Caller Display it is important to store
the full telephone number in the directory including
the area code.
To insert a pause when storing a
number in the directory
Press and hold the 0 button until a
/
appears
on the point where you want to enter a pause.
The
/
indicates a pause, therefore, when you
dial the number stored your On-Air 2000
Executive will automatically insert the pause
where it was stored.
0
Handsfree
To use handsfree
Name and number directory