BT 2000 Executive Telephone User Manual


 
Note
When planning to use a handset with more than
one base, we recommend that you:
Give a number to each base (from 1-4).
Number each handset (from 1-6).
Register your handset(s) at base 2 (and 3 & 4
if used) using the same internal number as at
base 1.
Press the UP button to scroll to the
Base menu
.
Press the OK button to confirm.
Use the UP or DOWN button to scroll to
Base settings
.
Press the OK button to confirm.
Use the DOWN button to scroll to
Handsets
.
Press the OK button to confirm.
Use the DOWN button to scroll to
De-register
.
Press the OK button to confirm.
Enter the System Code.
Press the OK button to confirm.
Use the UP or DOWN button to scroll to the
handset that you want to de-register.
Press the OK button to confirm.
This will time out and go back to idle.
Or
Press the C button until you get back to idle.
The handset is now de-registered.
To de-register your BT On-Air 2000
Executive handset from the base
COK
COK
COK
COK
COK
COK
COK
9
On-Air 2000 Executive ~ 3rd Edition ~ 2nd August ’02 ~ 4744
On the handset:-
Use the UP button to scroll to
Base
.
Press the OK button to confirm.
The display will show
Register
.
Press the OK button to confirm.
Use the UP or DOWN button to scroll to
Custom
.
Press the OK button to confirm.
Use the UP or DOWN button to scroll to
the required base number.
Press the OK button to confirm.
At this stage if you require you can edit the
base name.
Press the OK button to confirm.
Enter the System Code using the keypad.
Press the OK button to confirm.
The display will now flash
Searching for base
.
You will then see a list of the available
handset numbers.
Use the UP or DOWN button to scroll to
the number you require.
Press the OK button to confirm.
After a few seconds the handset will be
registered and display:
C can also be pressed to return
to idle.
COK
COK
COK
COK
COK
COK
COK
COK
Base 1
Handset 2
Note
The number you save becomes the handset’s name
(ie. ‘Handset 2’).