Filter
Top Products
On-Air 1300 Executive user guide ~ Edition 3 ~ 7th August ’01 ~ 3992
32
To register a handset to a base
station (if you have changed the
System Code from 0000)
At the base:–
Press and hold down the
ᮤ
SKIP button
until the PLAY button starts to flash.
On the handset:–
Use the UP or DOWN button to scroll
to
Base
.
Press
OK to confirm.
The display will show
Register
.
Press
OK to confirm.
Use the
UP or DOWN button to scroll
to
Custom
.
Press
OK to confirm.
Use the
UP or DOWN button to scroll
to the required base number.
Press
OK to confirm.
At this stage if you require you can edit
the base name.
Press
OK to confirm.
Enter the System Code using the
keypad.
Press
OK to confirm.
After a few seconds the handset will be
registered and display:
C can also be pressed to return to idle.
Base 1
Handset 2
▲
▼
▲
▼
▲
▼
COK
COK
COK
COK
ᮤ
S
k
i
p
▲
▼
COK
COK
COK
COK
CODE
Note
The number you save becomes the handset’s
name (ie. ‘Handset 1’).
Note
When planning to use a handset with more
than one base, we recommend that you:
• Give a number to each base (from 1-4).
• Number each handset (from 1-6).
• Register your handset(s) at base 2 (and
3 & 4 if used) using the same internal
number as at base 1.
The display will now flash
Searching
for base
.
You will then see a list of the available
handset numbers.
Use the
UP or DOWN button to scroll
to the number you require.
Press
OK to confirm.