Filter
Top Products
29
On-Air 1300 Executive user guide ~ Edition 3 ~ 7th August ’01 ~ 3992
Remote access
You can operate your answering machine from
any external Touchtone
TM
phone by phoning your
BT On-Air and entering your remote access code.
Having a remote access code prevents other
people from accessing your answering machine
functions without your permission.
Important
You must change the Remote Access Code
from the default setting of
0000
for your
remote access to function.
Press OK to confirm.
Enter your new four digit code.
Press
OK to confirm.
The display will ask you to
Confirm code
.
Re-Enter your new code.
Press OK to confirm.
Use the
UP or DOWN button to scroll
to
Base
.
Press
OK to confirm.
Use the
UP or DOWN button to scroll
to
Base settings
.
Press
OK to confirm.
Use the
UP or DOWN button to scroll
to
Answer
.
Press
OK to confirm.
Use the
UP or DOWN button to scroll
to
Remote acc
.
Press
OK to confirm.
Enter your old four digit code. (Factory
setting is
0000
)
To change your Remote
Access Code
COK
COK
CODE
COK
CODE
If you forget to switch your answering
machine on you can do it from another
telephone:
Dial your telephone number and let the
phone ring. After approximately 10 rings
your On-Air will automatically answer,
although you will hear no message.
At this point press the
#
button,
followed by your Remote Access Code.
Wait for the confirmation tone then
press
7.
Your answering machine will now be
switched on.
To switch on your answering machine
from another external telephone
CODE
7
P
Q
R
S
▲
▼
▲
▼
COK
COK
▲
▼
COK
▲
▼
COK
CODE