Filter
Top Products
34
BT Freestyle 6100 – Edition 2-1 – 24.06.04 – 6239
Set the dial mode
1. Select Menu, scroll or to
Set Base
and select OK.
2. Scroll or to
Dial Mode
and select OK.
3. Use or to choose
Tone
or
Pulse
, then select OK.
Saved
is briefly displayed.
4. Press to exit.
Change the system PIN
The system PIN is required when registering additional
handsets and bases with your BT Freestyle 6100 (see
page 36).It acts as a security device to prevent
unauthorised changes to your phone system. The default
system PIN is 0000, so you may choose to change this
to a more personal number.
1. Select Menu, scroll to
Set Base
and select OK.
2. Scroll to
System PIN
and select OK.
3. The display shows
Old PIN
. Enter the current system PIN
(default: 0000). The digits you enter are displayed as
underscores (i.e.
-- -- -- --
). Select OK.
4. The display shows
New PIN
. Enter your new system PIN,
then select OK.
Base settings
Your BT Freestyle 6100 is set to
Tone dialling. This is suitable for
most domestic use. It is unlikely
you will need to change this setting
unless you are connected to a
switchboard which requires Pulse
dialling.
IMPORTANT
If you change the system PIN, keep
a record of the new number by
writing in the space provided on
page 47.