Filter
Top Products
80
BT Diverse 6450 – Issue 2 - Edition 01 – 05.01.05 – 6260
4. Display shows
ENTER NEW PIN
. Enter the new PIN and
press SAVE. Display shows
CONFIRM NEW PIN
. Enter your
new PIN again.
4. Press SAVE. The display shows
SYSTEM PIN CHANGED
.
5. Press to return to standby or BACK to go one step
back in the menu.
Repeater mode
You can use a repeater to boost the range and reception
of your base. A repeater must be registered with the base
and the repeater function must be set to ON.
The default setting is off.
1. Press MENU then scroll DOWN to
BASE SETTINGS
and
press OK. Scroll DOWN to
REPEATER MODE
.
2. Press OK then LEFT or RIGHT to select
ON
or
OFF
.
3. Press SAVE to keep the settings displayed.
4. Press to return to standby or BACK to go one step
back in the menu.
Base settings