Filter
Top Products
BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191
53
BT Diverse Helpline – 08457 908 070
GENERAL INFORMATION
To set the recall time
You need only adjust this setting
if your switchboard requires a
different recall time to the
pre-set recall time of 100ms.
Press the
MENU options button.
Press the
DOWN navigation
button until the display shows
Base Settings
.
Press the
OK options button.
Press the
DOWN navigation
button until the display shows
Additional Features
.
Press the
OK options button.
Press the
DOWN navigation
button until the display shows
Recall
.
Press the
OK options button.
Press the
DOWN navigation
button to select the recall time
80
,
100
,
120
,
180
,
250
,
300ms
or
600ms
.
Press the
OK options button to
confirm. The display shows
Entry Saved
.
Press the
RED PHONE button
until you reach the idle display.
MENU
OK
OK
OK
OK
Note
100ms is the standard setting for most
UK switchboards.
To switch temporarily from
pulse to tone dialling
If you are using pulse dialling
with your switchboard but
need tone dialling to use
certain functions on your
BT Diverse 5310 you can switch
to tone dialling during the call.
During your call:
Press the MENU options button.
Press the
DOWN navigation
button until the display shows
Tone dialling
.
Press the
OK options button.
Tone dialling is now active.
Press the
RED PHONE button
until you reach the idle display.
MENU
OK
Note
This setting is only for the duration of
the call.