Filter
Top Products
5
To register your new
handset to the base station
If you are using this product with a
Diverse 3010 Classic/ Executive
or a Diverse 3016, it comes
supplied with a handset which is
automatically registered as
handset number one.
Note
If you go out of range of a base
station for a long time while your
handset is switched ON, it may take
more than 20 minutes to ‘find’ the
base station again when you come
back within range. However, by
simply switching the handset OFF
for a moment, then ON again,
it will find the base station within
a few seconds.
At the handset:
Press the MENU button.
Press the
DOWN arrow
to highlight
Base
Settings
.
Press the
OK button.
Press the
DOWN arrow
to highlight the base
you wish to register to.
Press the
MORE
OPTIONS button.
Press the
DOWN arrow
to highlight
Register.
OK
–
–
-
-
–
–
–
Registering a new Diverse
3000 Executive handset with
the base station
Diverse 3000 Executive h/set & charger ~ Edition 6.1 ~ 23 Nov ’00 ~ 3510
10
It is essential that you register
your handset with your Diverse
base station for it to work. The
following are basic instructions
on how to do this, but these may
differ if you have a Diverse 2-Line
or Diverse ISDN.
If your base station is anything
other than Diverse 3000 series,
please refer to your base station
user guide for registering
instructions.
This and each further additional
handset you purchase must be
registered at the base station in
order to work.
Up to six handsets (up to 8 on
Diverse 2-Line and Diverse ISDN)
can be registered and operated
from the base station, allowing
you to make and transfer internal
calls between handsets as well as
make and receive external calls.
The instructions in this section
are for registering an Executive
Handset with one base station.
If you have a system with more
than one base station, please
follow the procedure in the section
‘Operating with additional base
stations’
in your main Diverse
base station user guide.
Diverse 3000 Exec h_s & ch 22/3/01 2:37 pm Page 9