BT 310 Telephone User Manual


 
Decor 310 ~ 5th Edition ~ 26th November ’01 ~ 3736
8
To make a handsfree call
Press the HANDSFREE button.
The handsfree light will come
on and HANDSFREE will be
displayed for 5 seconds. You
will hear the dial tone.
Dial the telephone number.
To end your call, press the
HANDSFREE button.
You can pick up the handset
at any time if you wish to speak
to your caller privately.
Handsfree talking
The handsfree feature allows you to
use the phone without picking up the
handset, giving you more freedom
when you are speaking on the phone.
You can hear the caller’s voice through
the in-built speaker.
You can also switch to handsfree mode
during a call by pressing the
HANDSFREE button and replacing the
handset.
Handsfree
Vol
Handsfree
To change the volume when
using handsfree
You can adjust the speaker
volume when you are on a
handsfree call.
Press the VOLUME button.
The volume level will be shown
on the display VOLUME .
There are 5 levels to choose
from. The display will show
the volume level as you adjust
it. The selected volume level
will remain until changed.
To receive a call in handsfree
mode
Press the HANDSFREE button
when the phone rings.
Handsfree
Note
You can only change the volume of
a call when using handsfree.
You may need to use the
RECALL button if you are
connected to a switchboard/
PBX (Private Branch
Exchange), contact your PBX
supplier for further information.
The RECALL button is also
used for BT Select Services.
For more information on
BT’s Select Services call BT on
Freefone 0800 800 150.
To use the Recall button
R