Filter
Top Products
Setting up the charger
1. Plug the power adaptor cable into the underside of
the charger.
2. Plug the power adaptor into the mains wall socket and
switch the power on.
3. Install the 2 x AAA rechargeable batteries supplied into
the handset.
4. Place the handset in the charger and charge the handset
for at least 24 hours. The red
Charging light on the
charger comes on and the icon will scroll.
Once the batteries are charged, the icon will flash in
the handset display.
Once the handset registers with the base, the icon
stops flashing.
Your BT Studio 1100 is ready for use.
9Getting started