Filter
Top Products
41Using additional bases
When the base is located, you will hear a confirmation
tone and
PIN?
will be displayed.
7. Enter the base PIN code and press .
You hear a tone to confirm you have entered the correct
code and the handset returns to idle mode.
Once registered you will hear a confirmation tone and
the next available handset number is allocated and
shown in the display.
Selecting a base to use
If your handset has been registered to more than one
base you can select which one it uses.
1. Press .
2. Press or until
REGISTER
is displayed then
press .
3. Press or until
SELECT BASE
is displayed then
press .
4. All bases that your handset is registered to will be
displayed, e.g.
BASE 1 2 3 4
.
The base that you are currently registered to will flash.
5. Enter the number of the base you want to use.
Menu
Vol
Menu
Vol
Menu
M
enu
If registration is unsuccessful, after
1 minute, the handset will display
the list of registered bases and you
can try again or select another
base to use.
If you are in an environment
where there is a lot of electrical
interference you may experience
difficulty registering to a base.
The default PIN code is 0000.