BT 1300 Telephone User Manual


 
The message waiting indicator is
activated by a stuttered dial tone
which you can hear when you pick
up your phone. BT Calling
Features, such as Call Diversion
and Call Barring use a stuttered
dial tone so therefore will cause
the message waiting indicator to
flash even if no messages have
been left.
IMPORTANT
After an incoming call, or after
lifting the handset, your BT Decor
1300 will check the line for any
messages. You will experience at
least a 2 minute delay before the
message waiting indicator light
flashes if messages have been left.
If you have subscribed to BT Answer 1571 or Call
Minder, your BT Decor 1300 will indicate when you have
received a voice message by the flashing messages light.
BT Answer 1571 and Call Minder are invisible answer
machines located at your local exchange which will take
messages when you are out, engaged on another call or
on the Internet.
To enable your BT Decor 1300 to let you know you have
messages you must first subscribe to a BT messaging
service:
BT Answer 1571 is a basic answering service and is
completely free of charge. To activate the service, dial
Freefone 0800 003 800.
For information on Call Minder, call BT on Freefone 0800
800 150. This is a chargeable service.
To access your voice mail messages
1. Press .
2. Your BT Decor 1300 goes into handsfree mode and you
will hear the telephone dialling out. After a few seconds
you will be connected automatically to your voice
mail service.
Or
BT Decor 1300 – Issue 1 – Edition 3 – 22.11.05 – 6901
1571 Voice mail indication
28