BT 4500 Cordless Telephone User Manual


 
81
BT Freestyle 4500 ~ Issue 3 ~ Edition 2 ~ 07.04.04 ~ 6062
Help
Problems Possible cause
No display appears The handset may be switched off.
Press and release the button to switch the
handset on.
The batteries may be flat, dead or incorrectly inserted.
Recharge, replace or renew the batteries.
No dial tone Make sure your handset is registered to the base and
within range of the base.
Is the telephone cord of the base plugged into the
phone socket?
Check that the base station is connected to the mains
power and switched on.
You cannot link up Does the display show
Out of Range?
If so, you are
with the base station out of range of the base the handset is registered to or
power is off at the base.
Batteries could be low or flat.
If using more than one base station, check that you
have the correct base selected.
5981 BT Freestyle 4500 [3-2] 16/4/04 3:12 pm Page 81