Filter
Top Products
66
BT Synergy 3205 SMS – Issue 2 – Edition 2 – 16.03.04 – 5980
General information
Dialling mode
1. Press then scroll to
SETUP
and press .
2. Scroll to
Dialling Mode
and press .
3. Press or to select either
Tone
or
Pulse
and press to confirm.
4. Press and hold the button to return to standby.
Automatically insert a pause after access code
With some switchboards, you may be required to dial a pause after entering the
switchboard access code (e.g. 9) to enable you to get an outside line.
This feature automatically inserts a pause between the access code and the telephone
number you have entered in the phonebook. However, for this feature to work, you must
still enter the access code before the telephone number when storing the number in the
Phonebook.
1. Press then scroll to display
Setup
and press .
2. Scroll to display
PABX Setup
and press .
3. Scroll to
Pabx 1
and press to display
PIN Code?
4. Enter the PIN (original code 0000) and press .
5. Enter the switchboard access code (e.g. 9) and press .
You can now choose the length of the pause – 3 or 5 seconds.
6. Scroll to
Pause Setup
and press .
5980 BT Synergy 3205 UG [2-2] 23/3/04 2:08 pm Page 66