Filter
Top Products
BT Synergy 3205 SMS – Issue 2 – Edition 2 – 16.03.04 – 5980
Handset settings
Set time and date
1. Press and then to display
Setup
and press
again.
2. Press to select
Time Setting
.
Display shows the date setting.
3. Enter the day and month, e.g. 17 June = 17 06 and
press .
4. Display shows the time setting. Enter the time using the
24 hour clock, e.g. 4.30pm = 16.30 and press .
Keypad and warning beeps
When you press a button on your handset, you hear a
beep. You can switch the beeps on and off.
1. Press then to display
Handset Menu
.
2. Press . Display shows
Warning Tones
, press
again.
3. Press or to select either
Keypress
,
Low Battery
or
Out of range
and press .
4. Press or to select
On
or
Off
and press .
5. Press and hold to return to standby.
24
If you have subscribed to your
network provider’s Caller Display
Service, the date and time is set
automatically when your BT
Synergy 3205 SMS receives its first
call. When new handsets are
registered to the base, they will also
receive the current date and time.
If the base station power is cut, the
date and time is saved on the
handset.
You can also adjust the date and
time automatically.
5980 BT Synergy 3205 UG [2-2] 23/3/04 2:10 pm Page 24