Filter
Top Products
Using the speed dial memory
Up to 50 names and numbers may be stored in
the system.
6
Enter this code.
The voice announces
“Record name”.
Speak the name to go with the number
into the handset.
After 3 seconds the voice announces
“Enter 2 digit location and number”
(to shorten the length of the recorded
RECALL
name, press RECALL while recording).
01-50
Enter the 2-digit memory location under
which you want to store the number.
(Select from
01 to 50).
KEYPAD
Enter the telephone number you want.
(It is not necessary to insert
9 for an
outside line when storing Speed Dial
numbers.)
Hang up your extension.
A maximum of 30 digits can be stored.
If 30 digits are entered, you will hear a
beep and the number is stored. Hang
up to finish.
Location 50 is reserved for a hotline
extension number.
Location 49 is reserved for the door
intercom
“Ring a telephone number”
mode. This will enable visitors to be
directed to another number (stored in
location 49) when pressing the door
intercom button.
29
Ultimate 106 – Edition 1 – Issue 3 - 18.12.02 – 5129
With the BT Ringback service, when an
engaged telephone becomes free again,
you are called back.
This is a BT Network Service and is
chargeable. Please contact BT for more
details.
When you hear the engaged signal:
5
Press 5.
Replace the receiver. When the network
rings back, all extensions will ring.
When you lift the handset, the call is
connected.
9
Enter this code from any extension.
#
37
#
To use the BT Ringback service
To cancel a BT network Ringback
PLEASE NOTE
If you have set Answer Machine, the Ringback
will continue to ring all extensions. It will not
be answered by the Answer Machine.
To store a name and number