Filter
Top Products
Connect the 3-pin plug into the mains socket and
switch the power on. The POWER light comes on.
Your Ultimate 106 is now installed
8
Ultimate 106 – Edition 1 – Issue 3 - 18.12.02 – 5129
●
4
Connect the power cable
Ultimate 106
1X6 PABX WITH VOICE MAIL & CALLER ID
Power
Day/Night
In Use
Messages
DISA/Ans
First remove the cable clamp. Connect the 2
exposed wires into the first set of twin screw
connectors in your Ultimate 106 and tighten the
screws to secure the wire, in place.
Replace the cable clamp when finished.
If you do not have modern phone sockets, call
Freefone 0800 800 150 and ask for a BT
engineer to come and fit the correct type. This
is a chargeable service.
EXT 11
EXT 12 EXT 13 EXT 14 EXT 15 EXT 16
Ext 11 Ext 12 Ext 13 Ext 14 Ext 15 Ext 16
ephone
Line
External
PLEASE NOTE
If you are planning to site 2 extension sockets
side by side, you can use the blue wires for one
socket and the orange wires for the second socket.
●
3
Connect the telephone line cord
Power
Day/Night
In Use
Messages
DISA/Ans
Ultimate 106
1X6 PABX WITH VOICE MAIL & CALLER ID
EXT 11
EXT 12 EXT 13EXT 14 EXT 15 EXT 16
Cable
clamp