Filter
Top Products
23
English
Tab 6, 12
Tab 2, 8, 14 Tab 3, 9, 15 Tab 4, 10, 16 Tab 5, 11
The mobile
phone and the
headset do not
connect.
• Make sure both devices are turned on and
Bluetooth
®
connectivity is enabled on the
phone.
• Turn the headset off, then on again. Make sure
the mobile phone is within 33 feet (10 meters)
of the headset.
• Check the Bluetooth device list on your phone
to be sure Bose BT2 is selected.
– If it is selected, delete it from the list (refer to
your phone instruction manual for details).
– If it is no longer listed, repeat “Additional
pairing” on page 13.
• Simultaneously hold
Call
and
Volume –
for
5 seconds to reset the memory, and pair the
headset to the phone again.
• Turn the phone power off, then on again.
What you
hear on the
headset is not
clear.
• During a call, adjust the volume on your
mobile phone or on the headset by pressing
Volume +
or
–
.
• Check your mobile phone signal strength.
• Make sure the mobile phone is within 33 feet
(10 meters) of the headset.
• Reposition the headset. Refer to “Fitting” on
page 14.
• Clean the wire mesh under the tip. See page 26.
GauguinOG.book Page 23 Friday, September 23, 2011 1:22 PM