Filter
Top Products
5
Introduction
The UTI1 Paging System is a paging and signaling system.The system provides the following features and functions:
Voice Channel
• Single-zone paging
• Telephone interfaces:
- loop start trunk
- ground start trunk
- station access (analog ring-up)
- page port contact closure activation
- page port voice activation
• Override paging (using loop start trunk or page port contact closure activation)
• Two audio outputs (both with level controls):
- paging and background music
- paging only
• Each output can provide audio for 150 Bogen one-way amplified speakers, also compatible with 70V amp inputs
• Pre-Announce/Confirmation Tone
• Adjustable Automatic Level Control with threshold and active indicator
Background Music
• High impedance transformer isolated BGM input with volume control
• Variable music mute
Signaling Tones
• Night Ringer (contact closure activation)
• Tone Trigger (tone and duration selectable, closure-activated)
Other Features
• C-form contact set with programmable activation events
• Non-volatile memory for setup data (no backup battery required)
• Setup Tone to assist in volume setting, etc.
• Pluggable terminal strips
• Microcontroller-based operation
• DTMF setting of operating parameters
Package Contents
•(1) UTI1
•(1) Installation and Use Manual