Filter
Top Products
BLUETOOTH HEADSET
–
USER MANUAL
6
English
Using with the Bluetooth-enabled Mobile Phone / PDA
<Pairing>
Step-1: Follow “Pairing” procedure to put the BT400 GX headset in the pairing mode
(page 5). If the headset is already on, please disconnect all Bluetooth services
between the headset and other devices in advance.
Step-2: Follow the operating instruction for your Bluetooth mobile phone to start the
pairing process. Typically, this is done by going to a ”Connect” or “Setup” menu and
then selecting the options to search the headset that is still in the pairing mode.
Step-3: The mobile phone / PDA display should indicate to you that it found the
headset named “BT400 GX” and ask if you want to pair it. Please press the
corresponding button such as “Ok”, “Yes” or “Accept” to confirm this action.
Step-4: The mobile phone / PDA display should then prompt you for a passkey or PIN.
Enter 0000 (a sequence of four zeros) and the display should prompt the pairing result.
If the pairing is unsuccessful, please turn off the headset and turn it on again. Then,
return to Step-1 and do the pairing procedure again.
< Answer a Call >
Step-1: If there is an incoming call, the mobile phone / PDA and the headset will ring
simultaneously.
Step-2: Please press the “Power / Talk / Pairing” Button of headset once to answer
the call.
< Make a Call >
Step-1: Use the keypad of mobile phone / PDA to dial the phone number.
Step-2: Press the “Send” or “OK” key of mobile phone / PDA. The mobile phone /
PDA initiate the call and transfer the call from the mobile phone / PDA to the headset.