Binatone 3488 Conference Phone User Manual


 
page 2 BASIC USE
Operating modes
page 3 BASIC USE
Timer Account
1
2
4
Press until the display shows
Press to display the total time
Press and hold it for 3 seconds
<TIMER ACCOUNT >
OR, to re-set the timer to zero:
3 Press to quit menu mode
This shows you how much time you have spent on calls (incoming and outgoing).
Display messages and symbols
1
2
3
4
5
6
Press until the display shows
Press so the display shows
Press again
Key in the current time, using the dialling keypad
Press if necessary to change the AM / PM setting
Press to confirm, then to quit menu mode
<SETTINGS >
CLCK SETTING >
The time is a four-digit number (HHMM) using the 12-hour clock
Setting the clock
Handset mode
Lift the handset to get a line
Replace the handset at the end of your call
Press to get a line
Press at the end of your call
Lift the handset to get a line
Press to listen to the call via the loudspeaker while talking
into the handset
Press to toggle between group listening and handset modes
To switch from handset to speakerphone mode:
Press and hold it while you replace the handset
Press once, release it, then press and hold it
To switch from speakerphone to handset mode:
Lift the handset
To switch from group mode to speakerphone mode:
while you
replace the handset
Speakerphone (hands-free)
mode
Group listening mode
Switching between modes
Menu functions
The take you through a
range of options on the display —
MENU buttons
Press
Press
Press
or to bring the menu up on the display, and
to select the option on the display, and go to the next level
to move back one level and to quit ‘menu mode’
to scroll through the
menu options
You can do this with the handset on-hook or off-hook.
For details of each feature, see the relevant page of this guide.
… or you can simply replace the handset to quit.
or if you wait for one minute without pressing a button, the
phone will automatically quit ‘menu mode’ and show the time.
THE DISPLAY MAY BE BLANK FOR A FEW MOMENTS BEFORE SHOWING THE TIME.
Key beep
1
2
4
Press until the display shows
Press
Press then to quit menu mode
<KEYBEEP >
3 Press or to switch between andON OFF
Normally, the unit will ‘beep’ whenever you press a button or key. You
can turn this off if you prefer.
02083448870
MUTED 00-27
The appears when you are using the Phone Book.
The appears when the phone is off hook (either on a call
or using the menu or Phone Book).
The (on-hook dialling symbol) appears when you are dialling
back a number from the Caller ID memory or the Phone Book, with
the handset on the base. It disappears when you lift the handset.
When you key in a number using the dialling keypad, it is
shown here. When the phone is ringing, the caller’s ID
may be shown here.
Call timer — when the phone has been connected to the line for
20 seconds (either busy on a call or with no button being
pressed), the duration is shown here. When you hang up, the
timer stops and stays on the display for another 16 seconds.
When you mute the
mouthpiece by pressing
the SECRECY button,
’ is shown here.
MUTED
NEW
CALL
The is shown when Babysitter’s Call is turned on (see page 7).
The appears when the battery needs to be replaced.
Without a battery, the clock and the Caller ID functions
will not work.
This is shown when there has been an incoming call, until
you have checked the caller’s ID.
The is shown if you subscribe to the BT Call Minder service (or
an equivalent service from your service provider) and a caller has
left a new message in your mailbox.
CALLER
ID
BABYCALL
SETTINGS
STORE
TIME
ACCOUNT
KEYBEEP
05-49 P
CLOCK >AM
KEYBEEP ON >
01-48-09
00-00-00
TOTAL
DELETED
MENU