Beltronics Beltronics Express Answering Machine User Manual


 
Digit #1 solidsws
is 
Digit #1 flashingsws
is 
- Guard
®
Alert— #
When on,unit will detect signals from Interceptor vg-2
transmitters.Factory setting is off.Use of vg-2 Guard
®
is
recommended only in areas known to use the Interceptor vg-2.
Digit #2 solidvg-2 Guard
®
is 
Digit #2 flashingvg-2 Guard
®
is 
Safety Warning System
®
with Digital Voice Messages— #
(EXPRESS
926 ONLY)
When on,unit will provide Digital Voice announcement when
sws
transmitters are detected. Factory setting is on.When
off,Digital Voice is replaced by sws
“tone/clicking”only.
Digit #3 solidsws
Digital Voice is 
Digit #3 flashingsws
Digital Voice is  (sws
tone only)
Digital Voice Prompts for Radar/Laser/sws
vg-2 Guard
®
(DIGIT
#3 FOR EXPRESS 916 ONLY
)
When ,unit will provide Digital Voice prompts followed by
“beeps”when X/K/Ka,Laser,VG-2 Guard
®
and the five sws
categories are detected.Factory setting is ON.When OFF,Digital
voice prompts are replaced by separate “beeps only.
Digit #3 solid—Digital Voice Prompts .
Digit #3 flashing—Digital Voice is  (“beeps”only)
Note: Digital Voice messages for the Five sws
catagories are not exact
to what is written on the sws
message information.
Digital Voice Prompts for Radar/Laser/vg-2 Guard
®
Alert— #
(
EXPRESS 926 ONLY)
When on,unit will provide Digital Voice prompts followed by
“beeps”when X/K/Ka,Laser and vg-2 Guard
®
signals are
detected.Additionally, EXPRESS 916 will provide Digital Voice for
sws
categories only.Factory setting is on.When “off”,
Digital Voice prompts are replaced by “beeps”only.
Digit #4 solid—Digital Voice prompts 
Digit #4 flashing—Digital Voice prompts  (“beeps”only)
12892 Bel Express 926/916 Man 4/26/01 2:44 PM Page 9