Filter
Top Products
. Slide the visor bracket onto the top of the detector until it
snaps into place.Clip the detector to the edge of the sun visor
nearest the windshield.
Windshield Mounting
1. Remove the mounting bracket cover on top of the unit by
pressing on the raised dots and pushing outward.Store the
cover in a safe place.
. Clean the selected windshield area,position the suction-cup
mount on the windshield,and press firmly on each suction
cup to secure it in place.
3. Use a screwdriver or a small coin to adjust the suction-cup
mount until the base plate is level.
. Slide detector onto base plate until it snaps into place.
Note—some vehicles have a plastic coating on the inside of the
windshield designed to protect occupants in case of an accident.
Use of the windshield bracket on this type of windshield can
permanently mark the surface.Check with your dealer if you
are unsure whether your vehicle is equipped with this type of
windshield.
12892 Bel Express 926/916 Man 4/26/01 2:44 PM Page 12