Belkin KX-TCA256 Telephone User Manual


 
Troubleshooting
48
Troubleshooting
Troubleshooting
Problem Description and Solution
The PS does not work. The battery is drained.
Charge the battery fully. (See “Battery Charge” on page 7.)
The PS has been cancelled or the PS has not been
registered.
Consult your dealer.
The power is OFF.
Turn it ON. (See “Power On/Off” on page 8.)
The PS does not ring. Ringer volume is set to “Off”.
Adjust the ringer volume level. (See “Ringer Volume
Adjustment” on page 14.)
You cannot make/receive a call. The PS is out of range or the Cell Station (CS) is busy.
Move closer to the CS or try again later.
The radio channel is busy or a radio communication error
occurred.
Try again later.
You cannot dial. The number which you dialled is restricted by the
Business Telephone System.
Consult your dealer.
The key lock mode is ON.
To cancel the mode, press the joystick for about 2 seconds.
(See “Key Lock” on page 15.)
The radio channel is busy or a radio communication error
occurred.
Try again later.
Noise is frequently heard. Set the PS and CS away from other electrical appliances.
Move closer to the CS.
CS Busy” is displayed. The Cell Station is busy.
Try again later.
PS Not Connected” is
displayed.
The called PS is out of range or is not turned on.
Try again later.
The PS stops working during
operation.
Turn the PS off, then turn it back on. (See “Power On/Off”
on page 8.)
Reinsert the battery and try again. (See “Battery
Installation” on page 7.)
Two short beeps are heard
during a conversation.
The radio signal is weak.
Move closer to the CS.