Filter
Top Products
JAO; Reviewed:
SPOC 11/3/2011
Solution & Interoperability Test Lab Application Notes
©2011 Avaya Inc. All Rights Reserved.
7 of 29
Algo-8028-SM
Configure the Trunk Group form as shown below. This trunk group is used for calls to the SIP
Phones. Set the Group Type field to sip, set the Service Type field to tie, specify the signaling
group associated with this trunk group in the Signaling Group field, and specify the Number of
Members supported by this SIP trunk group. Configure the other fields in bold and accept the
default values for the remaining fields.
add trunk-group 50 Page 1 of 21
TRUNK GROUP
Group Number: 50 Group Type: sip CDR Reports: y
Group Name: To devcon-asm COR: 1 TN: 1 TAC: 1050
Direction: two-way Outgoing Display? n
Dial Access? n Night Service:
Queue Length: 0
Service Type: tie Auth Code? n
Member Assignment Method: auto
Signaling Group: 50
Number of Members: 10