Filter
Top Products
JAO; Reviewed:
SPOC 11/3/2011
Solution & Interoperability Test Lab Application Notes
©2011 Avaya Inc. All Rights Reserved.
4 of 29
Algo-8028-SM
4. Equipment and Software Validated
The following equipment and software were used for the sample configuration provided:
Hardware Component
Version
Avaya S8800 Server and G650 Media
Gateway
Avaya Aura®
Communication Manager 6.0.1
SP 3 (R016x.00.1.510.1 w/Patch 19009)
Avaya Aura®
Session Manager
6.1 (6.1.2.0-612004)
Avaya Aura®
System Manager
6.1 (6.1.0.07345-6.1.5.106)
Avaya 9600 Series IP Telephones
3.1 (H.323)
2.6.4 (SIP)
Algo 8028 SIP Doorphone
1.4
5. Configure Avaya Aura® Communication Manager
This section describes the steps for configuring the 8028 SIP Doorphone as an Off-PBX Station
(OPS) and configuring a SIP trunk between the Communication Manager and Session Manager.
Section 5.2 covers the station configuration for the 8028 SIP Doorphone. Use the System
Access Terminal (SAT) to configure Communication Manager and log in with the appropriate
credentials.
Note: If Communication Manager is already configured with a SIP trunk to Session Manager,
skip Section 5.1 and go directly to Section 5.2 to configure the station for the 8028 SIP
Doorphone.
5.1. Configure SIP Trunk
In the IP Node Names form, assign an IP address and host name for the S8800 Server processor,
the C-LAN board in the G650 Media Gateway, and Session Manager. The host names will be
used throughout the other configuration screens of Communication Manager.
change node-names ip Page 1 of 2
IP NODE NAMES
Name IP Address
Gateway001 10.32.24.1
ModMsg 192.50.10.45
clancrm 10.32.24.20
default 0.0.0.0
devcon-asm 10.32.24.235
medprocrm 10.32.24.21
procr 10.32.24.10
procr6 ::
( 8 of 8 administered node-names were displayed )
Use 'list node-names' command to see all the administered node-names
Use 'change node-names ip xxx' to change a node-name 'xxx' or add a node-name