Filter
Top Products
16
REGULATORY NOTICE
The radiated output power of this internal wireless radio
is far below the FCC radio frequency exposure limits.
Nevertheless, the wireless radio shall be used as
described in the manual.
The internal wireless radio operates within guidelines
found in radio frequency safety standards and
recommendations, which reflect the consensus of the
scientific community.
Avaya therefore believes the internal wireless radio
is safe for use by consumers. The level of energy
emitted is far less than the electromagnetic energy
emitted by wireless devices such as mobile phones.
However, the use of wireless radios may be restricted
in some situations or environments, such as aboard
airplanes. If you are unsure of restrictions, you are
encouraged to ask for authorization before turning on
the wireless radio.
NOTE: Modifications not expressly approved by
Avaya could void the user’s authority to
operate the equipment.
This equipment complies with Part 68 of the FCC rules
and the requirements adopted by ACTA. On the
exterior of this equipment is a label that contains a
product identifier in the format US:AAAEQ##TXXXX. If
requested, this information must be provided to your
telephone company.
A plug and jack used to connect this equipment to the
premises wiring and telephone network must comply
with the applicable FCC Part 68 rules and
requirements adopted by ACTA. A compliant
telephone cord and modular plug is provided with this
product. It is designed to be connected to a
compatible jack that is also compliant. See installation
instructions for details.
The REN is useful to determine the quantity of devices
you may connect to your telephone line. Excessive
RENs on a telephone line may result in the devices not
ringing in response to an incoming call. In most, but
not all areas, the sum of the RENs should not exceed
five (5.0). To be certain of the number of devices you
may connect to your line, as determined by the REN,
contact your local telephone company. For product
approved after July 23, 2001, the REN for this
product is part of the product identifier that has the
format US:AAAEQ##TXXXX. The digits represented by
### are the REN without the decimal point. (For
example, 03 represents a REN of 0.3.) For earlier
producers, the REN is separately shown on the label.
If this telephone equipment causes harm to the
telephone network, the telephone company will notify
you in advance that temporary discontinuance of
service may be required. But if advance notice isn’t
practical, the telephone company will notify the
customer as soon as possible. Also, you will be
advised of your right to file a complaint with the FCC
if you believe it is necessary.
The telephone company may make changes in its
facilities, equipment, operations, or procedures that
could affect the proper functioning of your equipment.
If they do, you will be notified in advance in order for
you to make necessary modifications to maintain
uninterrupted service.
If trouble is experienced with this unit, for repair or
warranty information, please contact customer service
at (800) 544-4660 ext. 5538. If the equipment is
causing harm to the network, the telephone company
may request that you disconnect the equipment until
the problem is resolved.
DO NOT DISASSEMBLE THIS EQUIPMENT: it does not
contain any user serviceable components.
We recommend the installation of an AC surge
arrester in the AC outlet to which this equipment is
connected. Telephone companies report that electrical
surges, typically lighting transients, are very destructive
to customer terminal equipment connected to AC
power sources.
EXPOSURE TO RADIO FREQUENCY RADIATION
FCC REGISTRATION INFORMATION
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference;
and
2. This device must accept any interference received,
including interference that may cause undesired
operation.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.