Filter
Top Products
8
Using the Features
Answering and Placing a Call
To answer a call
1 Lift the handset.
2 Speak with the other party.
To place a call
1 Lift the handset or press the ON HOOK DIAL button.
• When you press the ON HOOK DIAL button, the light
next to the button goes on.
2 Dial the desired number.
Note: You can also use a memory-dialing button or dial a
number programmed on one of the numeric dial pad keys.
For more information, see “The Memory-Dialing Feature”
later in this section.
3 If you are using the ON HOOK DIAL button, lift the handset
when you hear the other person answer. Otherwise, press
the ON HOOK DIAL button again to end the call.
Note: If your telephone line is set to the Pulse position for normal
dialing, but you need to enter touch-tones for telephone answering/
messaging systems or such services as electronic banking-by-phone,
press during the dialing sequence. This will change the
subsequent numbers from pulse to tones. Your telephone will revert to
Pulse when you have finished the call.
To change from the handset to the speaker during a call
1 Press the ON HOOK DIAL button.
• The light next to the ON HOOK DIAL button goes on.
2 Hang up the handset.