Filter
Top Products
DECT system configuration
50
Enabling automatic DECT system selection
If you subscribe the handset to more than one DECT system, you can
configure your handset to automatically select the system to which it
connects.
If Automatic selection is enabled, when the handset moves out of range of
the current system, it automatically attempts to connect and log on to
another available (subscribed) DECT system.
To enable automatic selection of a DECT system, perform the following
steps:
1. Open the Connectivity menu using the steps in
“Accessing the Connectivity menu” (page 46).
2. Press the Up or Down key to highlight the Network
select option.
3. Press the Select soft key.
4. Highlight Auto. select.
5. Press the Select soft key.
The name of the currently active system highlights.
6. Press the Clr key one or more times to return to the
idle display.
Network select
Select
Auto. select
Select